Fixing Limit Device - electrovolta 900SC-400CS Manual De Instrucciones

FIXING LIMIT DEVICE

Fig. 9
The gate must feature check stops for aperture and closure that prevent the gate from derailing.
The position of the check stop must ensure that the limit devices do not collide with the pinion.
Manually open the gate leaving, based on the weight of the gate, a space between 30 and 50 mm. between
the gate and the mechanical stop.
Fix the limit device using the pins (fig. 10) leaving a space between the magnetic limit device and the
reduction gear of approximately13 mm (fig 9), and repeat the operation with the gate closed.
Fig.10
20