LG LSFS213 Serie Manual Del Propietário página 33

REMOVING AND REPLACING COMPONENTS
Tilt-Out Door Basket
1 To remove the tilt-out door basket, press in on
the end bracket, then pull up on the end of the
basket to remove.
Pull-Out Drawer
1 To remove the drawer, push the tabs located
on the front inside surface of each rail. Next,
gently lift the rear left and right sides of the
drawer and pull it out.
(CONT.)
2 To replace the tilt-out door basket, insert the
bracket into one side and hook one end of the
basket into the bracket. Next, hook the other
basket end into the other bracket and push
the bracket downward into place.
NOTE: Be sure the back of the basket is
positioned behind the retention tab on each
bracket.
Bracket
2 To reinstall, pull out both rails to full
extension. Insert the end of rib in the bracket
at left and right. Making sure that the guides
at the front are lined up properly, gently push
down on both sides.
33