Playback; Searching For A Desired Song; Quick Search (Cde-9874 Only) - Alpine CDE-9874 Manual De Instrucciones

Playback

1
Press SOURCE/ to switch to the iPod mode.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
3
To pause playback, press
Pressing / /ENT again will resume playback.
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast, the episode can be
changed by pressing 1 or
• An episode may have several chapters, the chapter can be changed
by pressing or .

Searching for a desired Song

An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit's search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
searches based on the table below.
Hierarchy 1 Hierarchy 2
Playlist Song
Artist* Album*
Album* Song
Song —
Podcast Episode
Genre* Artist*
Composer* Album*
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press /ESC to activate the search selection mode.
2
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to select the ARTIST
search mode, and then press
PLAYLIST ARTIST
GENRE COMPOSER
3
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to select the desired
Artist, and then press
4
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to select the desired
Album, and then press
18
-EN
/ /ENT.
2.
Hierarchy 3 Hierarchy 4
— —
Song —
— —
— —
— —
Album* Song
Song —
/ /ENT.
ALBUM SONG PODCAST
PLAYLIST
/ /ENT.
/ /ENT.
5
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to select the desired
Song, and then press
• After pressing and holding
in each hierarchy (except SONG hierarchy), all songs of the selected
hierarchy are played back.
• After selecting [ALL] in the search mode with"*", press and hold
/ /ENT for at least 2 seconds to play back all songs in the iPod
or selected search mode.
• While in the search mode, if you press and hold
2 seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• In the search mode, pressing
/AUDIO (CDE-9872 only) will return to the previous mode.
• Search cannot be made during M.I.X. play.
• "NO SONG" will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
• "NO PODCAST" will be displayed if there is no podcast data in the
iPod in the PODCAST search mode.
• If "iPod name" stored in the iPod is selected in the desired Playlist
search mode, and / /ENT is pressed, you can search for all
songs in the iPod. Also, if you press and hold
2 seconds, all songs in the iPod are played back.
• Depending on the iPod, podcast search is not supported.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 19.

Quick Search (CDE-9874 only)

You can search a song from all songs in the iPod without selecting an
album, artist, etc.
1
Press and hold /ESC for at least 2 seconds to
activate the Quick Search mode.
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
• Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
• If many songs are in the iPod, it takes time to search for songs.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 19.
• This function is inactive during repeat (RPT) playback.
/ /ENT.
/ /ENT for at least 2 seconds while
/ESC for
/MUTE (CDE-9874 only) or
/ /ENT for at least