Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Maintenance
Your doorbell and push button require no maintenance except to periodically
change the batteries.
If using the correct batteries, battery life should be approximately:
• Up to 2 years for the doorbell; replace with 3 AA alkaline batteries
• Up to 2 years for the push button; replace with a CR2032 lithium battery
Low Battery Notification
When doorbell batteries are low the bottom edge of the halo light flashes
yellow every 6 seconds until batteries are replaced.
When the push button batteries are low, two beep sounds are heard after the
normal tune.
Reset
This process removes all pairings, including the push button that came with
this doorbell:
1. Remove the doorbell battery.
2. Press and hold the Setting button, and replace the battery at the same
time.
3. The halo light will circle, and the doorbell is returned to its factory default
settings.
Specifications
Operating Temperature
ActivLink™
Range (open field)
Sound Level (typical)
RF Power
Battery Type
Battery Life (5 activations/day)
Rain proof
Doorbell
23°F to 104°F (-5ºC to 40ºC) -4°F to 122°F (-20ºC to 50ºC)
916.8 MHz
350 ft. (106 m)
84dBA
-
Input: 3 x AA (1.5 V) alkaline
Up to 2 years
N/A
7
Push Button
916.8 MHz
350 ft. (106 m)
-
<1.2W
CR2032
Up to 2 years
Pass UL1598 rain test.
Tabla de contenido
