Stanley 51186 Manual De Usuario página 3

1. Plug in your receiver.
2. Press and hold the power button on the receiver
for 5 seconds. The LED indicator will begin to
flash slowly indicating pairing mode has been
activated.
3. Press the 'ON' button followed by the 'OFF'
button on your transmitter to complete the
pairing process.
TO REMOVE ALL PAIRED TRANSMITTERS
FROM YOUR RECEIVER
1
POWER
1. Press and hold the power button for 5 seconds.
The LED indicator located on the power button
will begin to flash slowly.
2. While the indicator is flashing, press and hold
the power button for an additional 5 seconds.
The LED indicator will now begin to flash rapidly.
3. While the indicator is flashing rapidly, press the
power button once to confirm the reset.
2
POWER
3
POWER