cecotec CleanFry Manual De Instrucciones página 14

ENGLISH
• Place the fryer on an even, heat-resistant surface. Do not place the fryer near heat sources,
places with high humidity levels, or combustible materials.
• There are no internal serviceable parts, do not attempt to disassemble the appliance.
• The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings,
as it could cause an electrical shock or fire.
• Do not turn the fryer on if there is no oil in the tank.
• It is not advisable to mix different oil types or oils with different qualities.
• The fryer has a safety thermostat that turns the fryer off in case of overheating. This may
happen if there is not enough oil in the tank.
WARNING: do not attempt to move the fryer until it has completely cooled down. This can
take up to three hours. Use the handles at both sides.
WARNING: do not immerse the cord, plug, or any non-removable part of the fryer in water
or any other liquid, nor expose the electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
• Unplug from the electrical outlet when not in use and before cleaning. Allow it to cool down
completely before attaching or removing parts, and before cleaning the appliance.
• Do not leave the fryer unattended while connected to the mains supply.
• Do not lean over the fryer while in use.
• Be careful not to touch the surfaces of the fryer as they will become hot when in use.
• Cleaning and maintenance must be carried out according this instruction manual to make
sure it functions properly. Turn off and unplug the appliance before moving and cleaning it.
Allow it to cool completely before cleaning and storing it.
2. BEFORE USE
• Carefully unpack the appliance and remove all packaging materials. Check the contents to
make sure that all the parts and accessories are present and in good condition.
• Attach the handle of the basket in its place. Note that the handle folds back and locks for
storage.
• Wash the lid, basket, filter, and tank by hand with hot soapy water.
• Wipe the control panel with a damp cloth and/or kitchen paper.
IMPORTANT: do not immerse the control panel in water.
• Dry all parts of the fryer thoroughly and place the tank, filter, control panel, basket, and lid
back in place. Make sure the tank is in its correct position and aligned correctly, the max/min
marks should be placed to the right.
14 CLEANFRY 3 L FULL INOX
Manual Freidora CleanFry 3L Inox.indd 14 7/5/18 13:52