Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10

Enlaces rápidos

Operator Instructions
Includes – Foreseen Use, Work Stations, Putting Into Service,
Operating, Dismantling, Assembly and Safety Rules.
Manufacturer/Supplier
Sioux Tools, Inc.
250 Snap-on Drive
P.O. Box 1596
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765
Product Net Weight
2.70 lbs
1.21 Kg
Air Pressure
Recommended Working
Maximum
SAFETY MESSAGES
Personal Safety Equipment
Use – Safety Glasses
YES
Use – Safety Gloves
Use – Safety Boots
Use – Breathing Masks
Use – Ear Protectors
YES
Safety rules when using 5338A/
5338AP Impact Wrenches
– Use only impact sockets and extensions, universal
joints, etc. rated as being suitable for use with impact
wrenches.
– Prolonged exposure to vibration may cause injury.
– Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
– Do not exceed the maximum working air pressure.
– Use personal protection equipment as recommended.
– Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
– Use only compressed air at the
recommended conditions.
– If the tool appears to malfunction,
remove from use immediately and
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
to the tool and write or have written a
warning note and attach it to the tool.
– If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspension/support device.
– When operating the tool, always keep
Model 5338A/5338AP
3/8" Air Impact Wrenches
Fax No. 828-835-9685
Recommended Use Of
Balancer Or Support
N0
6.2
bar
90
PSI
6.2
bar
90
PSI
WARNING
Always Read Instructions
Before Using Power Tools
Always Wear Safety
Goggles
Wear Hearing Protection
Avoid Prolonged Exposure
To Vibration
Recommended Air Supply System
Page No 1
Important
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
Product Type
3/8" Air Impact Wrenches
Model No/Nos
5338A
Friction Ring Anvil
5338AP
Pin Anvil
Recommended Hose Bore
Size – Minimum
3/8 ins
10 mm
Noise Level: Sound Pressure Level 87.29 dB(A)
Sound Power Level
Test Method: Tested in accordance with Pneurop
test code PN8NTC1 and ISO Standard 3744
Vibration Level
Less Than 6.87 Meters / Sec
Test Method: Tested in accordance with ISO
standards 8662 Parts 1 & 7
the body and particularly the hands away from the work-
ing attachment fixed to the tool.
– The tool is not electrically insulated. Never use the tool
if there is any chance of coming into contact with live
electricity.
– Always when using the tool, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
– Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons trained to do so.
– Do not lock, tape, wire, etc. the 'On/Off' valve in 'On'
position. The trigger/lever, etc. must always be free to
Form # ZCE793
Date 2009 Mar 14/A
Max. RPM
CE
10,000
Cycles Per Min.
Serial No.
Recommended Max.
Hose Length
30 Ft
10 M
98.29 dB(A)
2
Figure 1
Tabla de contenido
loading

Resumen de contenidos para SIOUX 5338A

  • Página 10: Instrucciones Para El Operador

    Reglas de seguridad cuando usan las fijado a la herramienta. llaves de impacto 5338A y 5338AP - La herramienta no está aislada eléctricamente. Nunca use la herramienta si hay algún riesgo de entrar en - Use sólo casquillos o cubos y extensiones de tipo de...
  • Página 11: Uso Anticipado De La Herramienta

    5338A/5338AP (FRL), para controlar la presión de entrada del aire, de manera que La llave de impacto ha sido diseñada para apretar y aflojar los la presión se pueda ajustar para ayudar a controlar la tensión que...
  • Página 12: Forma De Volver A Montar La Herramienta

    Sioux Tools Inc. 250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A. Llaves de impacto de 3/8" modelos 5338A/5338AP, número de serie Declaramos bajo nuestra sola responsabilidad que este producto está en conformidad con las normas o documentos normalizados siguientes: EN792 (Borrador), EN292 Partes 1 &...
  • Página 20 Page No 20...

Este manual también es adecuado para:

5338ap

Tabla de contenido