General Information; Lamp Replacement - LG GR-M600YQ Manual Del Propietário

GENERAL INFORMATION

VACATION TIME
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave each door OPEN
to prevent odor formation.
POWER FAILURE
Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off. During power
failures of longer duration, place a block of dry ice on
top of your frozen packages.
IF YOU MOVE
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screw(s), turn them
all the way into the base.

LAMP REPLACEMENT

● Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the
same size, shape and wattage.
FREEZER LAMP
● Unplug the power cord from the outlet.
● Remove the room lamp lid by loosening 1 screw and
take down while pulling it forward with both hands as
shown in figure.
● Remove the lamp by turning it counterclockwise.
REFRIGERATOR LAMP
● Unplug the power cord from the outlet.
● Remove refrigerator shelves.
● Remove the room lamp lid by pulling it forward.
● Make sure the bulbs are cool to the touch. Remove the lamp by turning it
counterclockwise.
ANTI-CONDENSATION PIPE
The outside wall of the refrigerator cabinet may
sometimes get warm, especially just after
installation.
Don't be alarmed.
This is due to the anti-
condensation pipe, which
pumps hot refrigerant to
prevent "sweating" on the
outer cabinet wall.
Electrical Shock Hazard
Before replacing a burned-out light bulb, either
unplug the refrigerator or turn off power at the
circuit breaker or fuse box.
NOTE: Moving the control to the OFF position
does not remove power to the light circuit.
23
Caution