Pleasant Hearth MERLOT 23-07-71 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Insert two dowels (DD) into predrilled holes on
each end of shelf rail (N). Slip one end of shelf
rail (N) into predrilled holes in upper edge of
left inner panel (F) and the other end into
predrilled holes in upper edge of right inner
panel (G). Press together until both joints are
snug.
Hardware Used
DD
Dowel
2. Lay base (C) face up on a flat, level surface
and insert four dowels (DD) into predrilled
holes in center area of base (C). Slip panel
assembly over dowels (DD) so that the dowels
(DD) fit into predrilled holes in bottom edge of
assembly. Insert two bolts (AA) through flat
washers (BB), lock washers (CC), predrilled
holes in edge blocks and into predrilled holes
in base (C). Tighten with Phillips screwdriver
(not included).
Repeat on opposite side.
Hardware Used
AA Bolt
Flat Washer
BB
CC
Lock Washer
DD
Dowel
1
x 4
2
x 4
x 4
x 4
x 4
4
N
G
F
G
DD
F
C
DD
DD
AA
BB
CC