Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Connect the blower to the extractor hood with an
extension cable if required.
Use the added connector to hard-wire to the blower, if
required.
Use the wire diagram for connecting.
WARNING
•
The additional cover on the plug must always be
attached and closed for safety reasons.
•
Not needed wires must be isolated, capped with wire
nuts and stored in a safe position.
13
13
13
/
/
/
16
16
16
(21 mm)
(21 mm)
(21 mm)
NOTE: Confirm that the blower is securely attached to the
wall and all connections are secure.
NOTE: The unit can also be installed on the roof in
combination with a roof plate accessory (RFPLT600P or
RFPLT1000P). Ask your retailer or contact the Bosch
Customer Service Team at 1-800-944-2904.
English 4
"
"
"
Capítulos
Tabla de contenido
