Auriol Z31743A Manual Del Usaurio página 84

with the outdoor sensor. This process can take a
few minutes. The symbol flashes. Once the de-
vice has successfully connected to the external
sensor, the symbol stops flashing and the tem-
perature is shown in the LC display.
Note: If the temperature station does not receive
the signal from the outdoor sensor within 3 min-
utes, the temperature station automatically starts
with the reception of the radio time signal.
After successful reception of the outdoor sensor
signal or after 3 minutes, the temperature station
starts with the reception of the radio time signal.
This process can take up to 5 minutes and is indicated
in the LC display by the flashing symbol .
11
After successful reception of the DCF radio signal,
the symbol is displayed continuously in the
LC display.
Note: Do not move the temperature station while
it is receiving the signal. Otherwise this could inter-
fere with reception.If synchronisation is not possi-
ble when the temperature station is being first set
up, try changing the location (e.g. place the
temperature station near to a window).
Reception may be considerably reduced by obstruc-
tions (e.g. concrete walls) or sources of interference
(e.g. other electrical devices).
If the reception of the radio signal continues to be
interrupted, you can set the time and date manu-
ally (see "Setting the language / time zone / time /
date manually").
GB/MT 83