Ethernet Interface - OHAUS RANGER 7000 Manual De Instrucciones

EN-2

Ethernet Interface

3. Connect the Ethernet Cable.
4. Place the cord in the groove (see step 2) and put the red interface option cover back on.
SETUP
Upon installation, the scale will recognize the Ethernet Interface Kit and add relevant items to the
menu. Configure the scale to the desired RS232 and printing parameters (refer to the scale User
Manual for assistance in using the menus).
Ethernet Connection
If DHCP is set to ON, the IP Address will be automatically assigned by the IP share or router. If the
DHCP is set to OFF, the user can setup the IP Address, Subnet mask, Gateway, Preferred DNS and
Alternate DNS. The Interface has a preset IP Address. The Port Number is always 9761 and cannot
be changed.
Note: After the setup of IP Address, Gateway, Preferred DNS and Alternate DNS, please reboot the
scale to enable the setting.
GlobalTestSupply
www. .com
d Quality Products Online at: [email protected]