Del Disipador De Calor; Removing The Heat-Sink Assembly - Dell Precision 7550 Manual De Servicio

4. Place the memory shield above the memory module.
5. Replace the (M2x3) screw to secure the memory shield to the memory module.
Next steps
1. Install the keyboard.
2. Install the
keyboard
lattice.
3. Install the battery.
4. Install the base cover.
5. Install the SD card.
6. Follow the procedure in

del disipador de calor

Removing the heat-sink assembly

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
About this task
The figure indicates the location of the heat-sink assembly and provides a visual representation of the removal procedure.
Steps
1. Peel the power-adapter cable from the heat-sink assembly.
2. Disconnect the two fan cables from the connectors on the system board.
3. Loosen the eight captive screws that secure the heat-sink assembly to the system board.
NOTE: Loosen the captive screws in the order stamped onto the heat-sink assembly next to the screws [1 > 2 > 3 > 4
> 5 > 6 > 7 > 8].
after working inside your computer.
before working inside your computer.
Desmontaje y reensamblaje 43