Clatronic DB 3061 K Instrucciones De Servicio página 45

4. Sort out the garments according to their ironing temperatures. Start with the lower
temperatures. It is set with the thermostat (1):
•
• •
• • •
MAX
5. Electrical connection
• Make sure that the iron voltage (see name plate) and the line voltage match.
• Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
6. The control lamp (2) lights up. As soon as it shuts off, the set temperature is reached.
Now you can start to iron.
7. Always pull the plug out of the socket after using the iron.
Steam Ironing ( )
For this a high temperature is needed (cotton, linen).
The quantity of steam can be regulated using the steam quantity regulator (4).
Extra steam can be added with the steam jet function „ " (3).
When ironing at low temperatures, make sure that you reduce the quantity of steam or
iron without steam. If the temperature is too low water may leak from the soleplate. The
appliance features an „anti-leakage function" which deactivates the steam mode if the
temperature chosen is insuffi cient for steam operation.
Refi lling the water tank
• Always disconnect the mains plug before refi lling water.
• Set the steam control (4) to „ " (no steam). Open the lid of the refi ll inlet (6) and careful-
ly pour in the water. Do not exceed the maximum line as marked on the water reservoir.
Spray Function ( )
In order to moisten a section to be ironed press the spray button (5).
05-DB 3061 K 45
Synthetics, silk
Wool
Cotton, linen
no steam
Small steam volume
Large steam volume
Caution: the steam is hot. Danger of scalding!
low temperature
medium temperature
high temperature
maximum temperature
27.04.2006, 15:46:26 Uhr
GB
45