Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Prepare and Use the Equipment:
- Check that the equipment is completely clean, the power knob is in the OFF position
and that the power cord is not connected to the power outlet.
- Gently remove the water tank from the base.
- Unscrew the cap on the underside of the tank, and fill the water tank, leaving
approximately 1/4" of space from the rim when the tank is upside down.
Do not fill water all the way to the rim.
- Screw the cap back on, and fit the water tank right side up back into the base
of the unit, making sure it is properly secured in place.
- Connect the equipment to a power outlet.
- Use the mist regulation knob to turn the unit ON by moving the knob clockwise.
- The nightlight illuminates when the unit is ON, and vapor will start to exit.
- Use the mist regulation knob to control the amount of vapor flow desired.
- To turn the unit OFF, turn the knob counterclockwise. The nightlight will turn off
when the unit is OFF.
- When the water tank is empty, the humidifier stops automatically.
Tabla de contenido
