7. Technical Information
Maintenance
Technical
Specifications
Page 14 of 40
To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned at least twice a month. Dust build-up
reduces light output performance and can cause overheating. This can lead to
reduced lamp life and increased mechanical wear. Be sure to power off fixture before
conducting maintenance.
•
Unplug fixture from power.
•
Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents.
•
Clean all lenses when the fixture is cold with a mild solution of glass cleaner or
Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue.
•
Apply solution to the cloth or tissue and drag dirt and grime to the outside of the
lens.
•
Gently polish optical surfaces until they are free of haze and lint.
Always dry the parts carefully after cleaning them.
Never spin a fan using compressed air.
Length
Dimensions and
Weight
19 in (483 mm)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type
Power
External power supply
Parameter
Consumption
Operating/Inrush
current
Thermal
I/O Connectors
DMX
Product Name
Ordering
Width
7 in (178 mm)
Range
100~240 V, 50/60 Hz
120 V, 60 Hz
<1 W
0.2 A
DMX Refresh Rate
25 Hz
Maximum External Temp.
104° F (40° C)
Connector Type
3-pin XLR
Sockets
Item Code
Obey™ 70
09080234
Height
Weight
2.8 in (71 mm)
7.3 lbs (3.3 kg)
Voltage Selection
Auto-ranging
230 V, 50 Hz
<1 W
0.2 A
Channel Range
384
Item Number
OBEY70
Obey™ 70 User Manual Rev. 5 ML