Control Panel - Samsung DMR78 Serie Manual Del Usuario

setting up your dishwasher

control panEl

dmR78 Series
dISplAy
1
delAy START
2
SANITIZe WITh
3
exTRA dRy
hAlF lOAd
4
8_ setting up your dishwasher
DMR78-00036A(XAA).indb 8
1
Displays the remaining wash time, any wash information (Delay start, Sanitize,
Half load, Child lock), and error messages (Rinse refill, error).
If an error occurs during an operation, an error message is displayed with a
warning sound. Refer to the information codes page.
Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
indicates the time at which the wash will be started.
The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the Sanitize with Extra Dry option, the "Sanitize" indicator blinks
when the water temperature meets the sanitary temperature (over 155 ˚F
(68 ˚C)), and then illuminates for 10 minutes at the end of the cycle while it
sanitizes.
The Sanitize feature is in accordance with NSF/ANSI Standard 184
for Residential Dishwashers. Certified residential dishwashers are not
intended for licensed food establishments. Your dishwasher is NSF
Certified. The cycle that is NSF certified is the Heavy Cycle with the
sanitize with extra dry option selected.
You should select Sanitize with Extra Dry option with rinse aid for better
drying performance.
Select this option to wash a small load of dishes. It is recommended that
dishes are placed in the upper rack for this feature.
When Half Load is selected, the dishes placed in the lower rack will not
be washed. Only the dishes in the upper rack will be washed.
If you select the Half Load option, both water and electricity consumption are
reduced.
2 3 4
2009-09-11 7:19:05