Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USING THE PASTA ROLLER AND CUTTERS
DISASSEMBLING THE PASTA ROLLER AND CUTTERS
1
Turn Stand Mixer off and unplug.
OPTIONAL: If desired, attach the
next Pasta Roller or Cutter, using the
directions in the "Attaching the Pasta
Roller and Cutters" section.
NOTE: Allow Stand Mixer to rest for at
least 1 hour after extruding 2 consecutive
pasta dough recipes.
8 | USING THE PASTA ROLLER AND CUTTERS
W10818898B_ENv03.indd 8
Remove the Pasta Roller or Cutter
2
from the Stand Mixer.
IMPORTANT: After removing the Pasta
Roller or Cutter from the Stand Mixer, be
sure to clean any dried dough. See "Care
and Cleaning" for details.
After finishing with the Pasta Roller
and Cutters replace the hub cover
3
and tighten the attachment knob
on the Stand Mixer.
2/24/16 10:03 AM
Tabla de contenido
