Glacier bay VWD2266W-1 Guía De Uso Y Cuidado página 7

Pre-Operation (continued)
ANTI-lEAK BOTTlE SUPPORT cOllAR
The bottle support collar (A) on your water dispenser is engineered with a
special anti-leak system to prevent accidental loss of water, (flooding) as a
result of inadvertently installing a defective water bottle. Unfortunately, not all
water bottles are created equal. Almost all 3 and 5 gallon (11.3 and
18.9 L) water bottles are recycled and handled extensively during cleaning,
filling, and shipping. As a result, they are very prone to developing hairline
fractures and pinhole leaks that are not always obvious to the end user until
the time of installation.
iMPOrTanT: Never knowingly install a defective water bottle on a
water dispenser. Return immediately for replacement.
If you are experiencing a leak, this simple test will allow you to determine
whether your water bottle or dispenser is the source of the problem.
□ Unplug the unit and remove the water bottle.
□ Remove the bottle support collar (A), and check the water level inside
the reservoir. It should be roughly three-quarters full.
□ Add or drain a few glasses of water to achieve the required fill level.
□ Closely monitor the water level inside the reservoir (1-2 hours). If the
water level drops, immediately drain the remaining water from the unit
and call customer service at 1-877-527-0313. If the water level remains
constant, it is the water bottle and not the dispenser that is leaking.
Please contact your water supplier for a replacement bottle.
A
7
Please contact 1-877-527-0313 for further assistance.
Vent Tube
Water Level
HOMEDEPOT.COM