Replacing Headlight Bulb - Panasonic QUICKDRAW MC-V5268 Instrucciones De Operación

Bulb Socket Assembly
Casquillo portalámparas
Assemblage de la lampe
+
Felt Packing
Empaquetadura
de fieltro
Cale en feutre
Motor Shaft
Eje del motor
Arbre d'entraînement
du moteur

Replacing Headlight Bulb

+
Replacing Belt
+
+
Lift Agitator Up
Unidad del agitador
Soulever l'agitateur
+
Install
New Belt
Instalación
de la correa
Poser la
nouvelle
courroie
➢ ➢ Remove lower plate.
➢ ➢ Remove bulb socket screw, grasp the
bulb socket assembly and pull
upward while moving it back and
forth.
➢ ➢ Remove old bulb from the bulb socket
assembly by pushing in while turning
counter-clockwise.
➢ ➢ Replace bulb by pushing in while
turning clockwise.
➢ ➢ Only use a bulb rated 130 V AC-15
Watts or less.
➢ ➢ Reinstall bulb socket assembly into
nozzle housing by pushing it back
down into slot and reinstall bulb
socket screw.
➢ ➢ Reinstall lower plate.
➢ ➢ Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
➢ ➢ Remove lower plate.
➢ ➢ Lift rear belt cover and remove felt
packing.
➢ ➢ Remove agitator by carefully lifting
out.
➢ ➢ Remove worn or broken belt.
➢ ➢ Clean agitator.
➢ ➢ Loop new belt (Panasonic Type UB8
only) around motor shaft and
agitator pulley; see illustration for
correct belt routing.
- 28 -