Idiomas disponibles
Idiomas disponibles
Balancing the fan
After installation, in some cases, you may hear a vibration from your fan. The higher the speed, the louder the sound
will be.
This is due to the fact that your fan is unbalanced, there are several factors that can unbalance a ceiling fan, in most
cases an inconsistency on the blades is the root of the problem.
1) Measure the distance between each blade, and check that the space between the blades is the same. If this is not
the case, unscrew the correspondant blade and put it at the right distance.
2) Check the distance between the end of the blades and your ceiling, if you notice a difference in distance between
the ceiling and the blade, disassemble the blade, check that you have all the elements of the type washers.
3) Length of the blades. Check that all the blades are fixed in the same way with the same distance between the
motor and the end of the blades.
Finally, a balancing kit is provided in your fan, it is possible that a blade is lighter than 0.5 or 1 Gr than the others,
which causes a vibration.
To detect the blade that would be different, use the clip provided for this purpose. Attach the clamp to a blade and
turn on the fan, see if it improves balancing
Troubleshooting
_
Problems
The fan does not start
The fan vibrates
The fan makes noise
Warranty Exclusion
Excluded from the warranty are all the blows on the blades or engines, all broken bulbs, and of course all the problems of
transport.
Blinking of the receiver:
The blinking of receivers are not covered by the guarantee, because at the installation you are responsible for:
- Use a single power line for your fan.
- Protect it with an "A" curve circuit breaker
- Use a wall switch to turn off the fan in case you do not use it for a while.
Voltage rise of your supplier will not be covered by the warranty.
_ _
Possible reason
a. Circuit breaker
out of position.
b. The electrical
connections of
the fan moved
c. The battery of the
remote control is
at HS.
d. The fan is not
paired
a. The blades are
not horizontal to
the ceiling
b. Blades are
missing
a. There are
missing screws
b.
The fan is poorly
fixed to the
ceiling
Le ventilateur fait du
bruit.
Solution
a. Check your circuit breaker.
b. Check the connections of
your fan.
c. Replace the battery of the
remote control.
d. Pair your fan.
a. Review the balancing
sequence of the blades.
b. Tighten all the screws.
a. Tighten all the screws.
b. Tighten the screws of the
fixing plate.
c. Il manque des visses
d. Le ventilateur est mal
fixé au plafond
__ ________
__ ________
c. Resserrez toutes les
visses.
d. Resserrez les visses
_ _
__ ________
de la platine de
fixation.
