Technical Description; Operation - Mobicool MB40 AC/DC Instrucciones De Uso

Nevera por compresor
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37

Technical description

6
Technical description
The hybrid cooler is suitable for portable use. It is equipped with two separate
cooling systems. The device features a Peltier cooling system with heat dis-
charged by a fan, as well as a compressor cooling system. The cooling sys-
tem is non-wearing.
In thermoelectric mode (connection to 12 Vg), it can cool goods down to max.
20 °C below ambient temperature and keep them cool. In compressor mode
(connection to 230 V), it can cool goods down to –15 °C and keep them cool.
In compressor mode, you can use the continuously variable thermostat to set
the temperature within a range from +12 °C to –15 °C.
6.1
Description of the device
No. in
fig. 2, page 2
1
2
3
7

Operation

!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the chapter "Cleaning
and maintenance" on page 11).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
8
Description
Handle
Ventilation slots
Thermostat
MB40 AC/DC
EN
Tabla de contenido
loading

Tabla de contenido