Technical Specifications - Twiins D1 VA Manual De Instrucciones

before the device powers off.
Call functions
When there is an incoming call, the speaker will provide
an acoustic signal.
Answering by pressing the button (1b): press the
control button (1b) only once
Answering through a voice command: answer the call
by speaking any word out loud (e.g. "Answer!")
Ending a call: press the control button (1b) only once or
wait until the other person hangs up
Rejecting an incoming call: press the control button
(1b) twice, as soon as you hear the acoustic signal for
an incoming call
Redialling: press the control button (1b) twice. This
depends on the features and configuration of your
mobile phone.
Adjusting the volume
The Twiins D1 VA device is pre-programmed with a
®
volume level that allows for optimal listening at speeds
of up to 80 km/h (50 mph). To adjust the volume, use
the volume controls on the connected device.
Volume perception may vary depending on the position
and separation of the speakers from your ears, as
well as the type of helmet and motorcycle, external
conditions and other factors.

Technical Specifications

Bluetooth : 2.1 Class 2
®
Profiles: HSP, HFP, EDR
Battery: Lithium polymer, allowing for up to 7 hours of
talk time and 200 hours of standby time (depending on
use and configuration of the device)
Compatible
Twiins D2HSAi intercoms
®
Ready to operate as an intercom: you can pair your
Twiins D1 VA device to a Twiins
®
D2HSAi and activate the intercom mode, without losing
the hands-free features for your phone.
Dual link: While connected to a Twiins
D2HSAi, if you receive a call, the intercom function will
stop and then resume when the call ends.
8
with Twiins D3
®
D3 or a Twiins
®
D3 or Twiins
®
Care and maintenance
The Twiins D1 VA device uses components with
®
the latest technology and is manufactured to high
standards.
To keep your device from inadvertently becoming
damaged, please read the following recommendations
carefully:
• Do not attempt to open any of the system
components, since the electronic parts inside it may
become damaged. Do not attempt to open or change
the battery as it may be dangerous.
• Keep the Twiins
• Keep the Twiins
condensation may damage the electronic circuits.
• Avoid exposing the device to extreme temperatures.
Intense cold may create condensation inside the
components as these warm up. Extreme heat may
damage the battery, circuits or casings.
• Do not drop, hit or bend the components as the
internal circuits may become damaged.
• Do not paint or decorate the Twiins
casings may become damaged or impede correct
operation.
• Do not use chemical products, solvents or detergents
to clean the Twiins
device.
Troubleshooting
If you cannot connect your Twiins
mobile phone:
• Make sure the Twiins
• Make sure your mobile phone is switched on and
Bluetooth has been turned on
®
• Make sure both devices are paired
• Make sure the Twiins
and
phone are fewer than 10 metres (32 ft.) apart
If, after this, you're still unable to pair or use the Twiins
D1 VA with your mobile phone, please contact the
retailer where you purchased the product.
®
Shortcuts
The Twiins D1 VA device allows you to receive calls
®
®
automatically (as long as this feature is supported by
your mobile phone). To do this, you need to activate
the automatic response feature in your mobile phone.
Press the control button (1b) to activate the voice
D1 VA out of the reach of children.
®
D1 VA in a dry place. Humidity and
®
D1 VA as the
®
D1 VA as these may damage the
®
D1 VA device to your
®
D1 VA is switched on
®
D1 VA device and your mobile
®
®