Lower Anchor Installation - Diono everett NXT Manual De Instrucciones

LOWER ANCHOR INSTALLATION

WARNING! Unsecured objects can become flying hazards and can cause
serious injury in an accident. If your vehicle is equipped with lower
anchors, Diono always recommends installation utilizing the LATCH
connectors with this booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
1. Disengage LATCH connectors from storage slots on
bottom of seat. While depressing the LATCH adjustment
button, rotate LATCH connectors away from the seat
bottom and extend fully until you hear a "click".
2. Place the seat in the vehicle and align the LATCH
connectors to the vehicle's lower anchors.
3. Attach both LATCH connectors to the vehicle
anchors. The LATCH lock button will change from
RED GREEN
to when the connectors "click" locking to
the vehicle anchors.
NOTE: Even with LATCH connectors properly attached
and adjusted, child seat will still have movement against
the vehicle seat back and bottom.
14
1-855-463-4666
WARNING!
If the indicator is RED, pull on the tab to release the connector from the
anchor and re-attach until the lock button turns GREEN.
1
DISENGAGING LOWER ANCHOR INSTALLATION
1. To release the LATCH connectors, pull the tab next
to the lock button on one connector and pull the seat
away from the vehicle seat. Repeat for the other
LATCH connector.
2
2. Remove the seat from the vehicle.
3. To store the LATCH connectors, push connectors
towards the seat bottom until they "click" locked into
the storage position.
3
LOWER ANCHOR INSTALLATION
Ensure the LATCH lock button is
www.diono.com
GREEN
on both connectors.
15