Genesis GLMT12 Manual Del Operario página 13

Sanding (FIG 9)
With sanding accessories, this tool is a detail sander. It
is suitable for dry sanding of wood, plastic, and metal
surfaces, especially in corners, edges and hard to reach
areas. See FIG 9.
Tips:
1. Work with the complete surface of the sandpaper, not
only with the tip.
2. Sand with continuous motion and light pressure. Do not
apply excessive pressure. Let tool do the work.
3. Always secure small work pieces.
4. Select suitable abrasive paper for best results.
Scraping (FIG 10,11)
Scraper blades are suitable for removing vinyl, varnish,
paint layers, carpeting, caulk and other adhesives.
use a rigid scraper blade to remove harder materials, such
as vinyl flooring, carpeting and tile adhesives in large area.
use a flexible scraper blade (not included) to remove softer
material such as caulk.
Tips:
1. When removing strong, tacky adhesive, grease the
scraper blade surface to reduce gumming up.
2. Begin with light pressure. The oscillating motion of
accessory only occurs when pressure is applied to the
material to be removed.
3. If you are removing caulk from a delicate surface, such
as a bath tub or tile back splash, we recommend taping
to protect the surface that blade will rest on.
Grout Removal (FIG 12)
use a grout removal blade (not included) to remove
damaged or cracked grout, or in order to replace a damaged
or broken tile.
To remove the grout, use a back and forth motion, making
several passes along the grout line. Be careful not to apply
too much side pressure on the grout blade. See FIG 12
aCCESSOriES
This tool must be used only with gEnESiS™ oscillating tool accessories-
gaMT301, gaMT302, gaMT303, gaMT304, gaMT305, gaMT306, gaMT307 and
gaMT308.
Please refer to "genesis Oscillating Tool accessory reference guide" Sheet
enclosed for details.
Fig 9
Fig 10
Fig 11
Fig 12
13