Bushnell TROPHY XTREME Manual De Instrucciones página 6

GETTING STARTED
INSERTING THE BATTERY
Remove the Posi-Thread™ battery door by lifting the battery door tab and then rotating counter clockwise.
Insert a CR2 3-volt lithium battery (supplied) into the compartment positive end first, then replace the battery
cap.
NOTE: It is recommended that the battery be replaced at least once every 12 months.
OPERATIONAL SUMMARY
While looking through the 4x eyepiece, depress the power button once to activate the in-view Liquid Crystal
Display (LCD). Place the aiming circle (located in the center of the field of view) upon a target at least 7 yards
away, depress and hold the power button down until the range reading is displayed near the bottom of the
in-view display. Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once
a range has been acquired, you can release the power button. The crosshairs surrounding the aiming circle
will disappear once the power button has been released or a distance has been displayed (i.e. the laser is
no longer being transmitted). Note: Once activated, the LCD will remain active and display the last distance
measurement for 30 seconds. You can depress the power button again at any time to distance to a new target.
As with any laser device, it is not recommended to directly view the emissions for long periods of time with
magnified lenses. The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button
down again.
LIQUID CRYSTAL DISPLAY (LCD) INDICATORS
Trophy Xtreme
features a Perma Focus monocular optical system for viewing your target. A liquid crystal
™
display (LCD) is mounted within the optical system and when activated, displays unit of measure, a reticle for
6