Loading Your Washer; Getting Started - Samsung WA50M7450A Serie Manual Del Usuario

operating instructions
WARNING: To reduce the risk of fi re, electric shock, or injury to persons when using your appliance,
follow basic precautions, including the following:
WARNING

LOADING YOUR WASHER

• Fill the tub with dry, unfolded clothes evenly around in order to enhance washing effi ciency and prevent
excess wear, or wrinkling of the load.
- For optimal washing performance, make sure the laundry is piled up evenly.
• Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle
with similar lightweight items.
• When washing big bulky items or a few smaller items that don't fi ll the tub
completely – a rug, a pillow, stuff ed toys, or one or two sweaters, for example –
add a few towels to improve spin performance.
• Do not insert bulky items except for Bedding in this cycle.
During the spin cycle, the washer may add additional water to redistribute the clothes and correct an
imbalance inside the drum.
• When washing heavily soiled loads, do not overload your washer to ensure good cleaning results.
• Infl atable items may cause damage to the laundry or the machine during the wash or drying
process.
WARNING
• Regardless of the size, blankets or quilts are safer and cleaner to wash one item at a time.
Two diff erent-sized blankets in the same load may compromise the drying performance due to
unbalanced loads.
To input a blanket
Fold the blanket into the blanket-specifi c net as shown, and then insert in the tub below the plastic
area of the tub.
Make sure the laundry is inserted completely.
WARNING
• Any exposed part of the laundry may cause damage to the machine or the laundry itself, or a water
leak.
• Do not overload the tub. Make sure no part of the laundry is exposed outside of the tub.
To add a forgotten item:
1. Press the Start/Pause button to pause the washer.
2. Wait for the door to unlock automatically, and then open the door.
3. Add the item, close the door, and then press the Start/Pause button. The cycle will resume.

GETTING STARTED

1. Load your washer.
2. Add liquid (or powder) detergent and additives to the dispenser (see pages 24~26).
3. Select the appropriate cycle and options for the load (see pages 18~23).
4. Close the lid.
5. Press the Start/Pause button.
6. The Wash Indicator light illuminates.
7. The estimated cycle time will appear in the display.
The time may fl uctuate to indicate the time remaining in the cycle better.
The actual time required for a cycle may diff er from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
8. Before your washer starts to fi ll, it will make a series of clicking noises to check the door lock and do a
quick drain.
• When the cycle is complete, the Door Lock light will go out and "End" (WA50M7450A*) / "0"
(WA45M7050A*) will appear in the display.
• Pressing the Power button cancels the cycle and stops your washer.
• The Wash, Rinse , and Spin indicator lights will illuminate during those portions of the cycle.
WA7000M_EN.indd 18 WA7000M_EN.indd 18
English - 18
2/3/2017 11:13:25 AM 2/3/2017 11:13:25 AM