Description Of Components; Function Description - Temper KEB-240-ST Manual De Instrucciones

KEB 240-ST
Battery Crimping Tool
Charger:
Sealing ring of cylinder:
Sealing ring of safety valve.

2. Description of components:

Parts No. Description
1-2 Die For crimping, interchangeable die
Showing the data (crimping times, electricity
3 LCD
capacity, error information)
4 Keyboard For power switch, function switch, LED light switch
5 LED indicator For lighting
For operating or retracting the piston in case of
6 Trigger
incorrect operation.
7 Lock Locking the battery
1 pc
1 set
1 set
Function
Battery Crimping Tool
8 Battery For supplying power, rechargeable Li-ion（18V）.

3. Function description

MCU –automatically detect the pressure during operation and provide Security protect,
shut off the motor and reset automatically after operation.
Auto reset- Release the pressure automatically, retract the piston to the
starting position when reached the max output.
One key control- press the trigger to start working, half
loosing the trigger means stop forcing pressure, loosing fully
means piston return to the
original position.
The unit is equipped with a double piston pump which is characterized
by a rapid approach of the die towards the connector and a slow crimping
motion
The head can be smoothly turned by 350° around the longitudinal axis
in order to gain better access to tight corners and other difficult working
areas.
Suspend—finish working or withdraw the hand from the trigger or any
accident happened, the device inside of the tool can stop power supply.
One significant sound will be heard and a red display flashes if any error
occurs or lower power being.( Ref. table 1)
Per time pressing on the trigger, the LED will lighting for 20
seconds.
High-performances Li-ion battery in strong power supply, No discharge
memory effect., Ultra lower power consumption standby design keep the
www.grupotemper.com