Craftsman 580.752820 Instrucciones De Uso página 6

KNOW YOUR PRESSURE WASHER
_Read the operator's manual and safety rules before operating your pressure washer.
......... Compare the illustrations with your pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
Spray Gun Nozzle Extension with
Quick Connect
Dial-A-Cleaner
TM
Selector Knob
Cleaning Tanks
Recoil Starter
Fuel Tank _
HydroFoam Launcher
TM
ProjectPro
TM
Nozzles
High Pressure Hose
Hose Reel
Air Filter
Choke Lever
Throttle Lever
Oil Fill Cap/Dipstick
High Pressure Outlet
Water Inlet
Air Filter -- Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Choke Lever -- Prepares a cold engine for starting.
Cleaning Tanks - Used to provide detergents designed
specifically for pressure washers to the low pressure water
stream.
DiaI-A-Cleaner
TM
Selector Knob - Selects any one of three
detergents or the clean water system rinse.
Fuel Tank -- Fill tank with regular unleaded fuel, Always
leave room for fuel expansion,
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet -- To connect high pressure hose.
Hose Reel -- Used for storing hose while unit is not in use.
Hose must be detached from pump and spray gun before
storage.
Pump equipped with
Automatic Cool Down System
HydroFoam
TM
Launcher -- Use to apply HydroFoam
TM
wash or other detergents designed specifically for pressure
washers.
Nozzle Extension with Quick Connect -- Allows you to
switch between three different spray nozzles and
HydroFoam
TM
Launcher.
Oil Fill Cap/Dipstick -- Check and fill engine with oil here.
See page 18 for oil recommendations and filling instructions.
ProjectPro
TM
Nozzles -- Max, General, and Delicate
Nozzle: for various cleaning applications.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Throttle Lever--Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet -- Connect garden hose here.