Sony SU-PF1L Manual Del Usuario página 8

2
Install the Display Unit on the stand.
1 Draw the Power Cord and the Display Interface Cable through the hole on the stand.
2 Check the position of the four holes on the fixtures on the stand beforehand.
Fit the hooks on the rear of the Display Unit into the holes on the fixtures of the stand.
3 Confirm that the hooks on the rear of the Display Unit are completely inserted into the four holes on the
fixtures. Then slide the Display Unit straight downward until it snaps on.
8
(US)
Rear side of
the Display Unit
2
Front side of the stand
1
Hook