Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Do not connect or disconnect the power plug with a wet hand as this
may cause electric shock.
Always hold the power plug to connect/disconnect the power cable
to/from the mains socket. Unplugging by pulling on the cable can
cause fraying and may lead to fire or electric shock.
This product has an earthed plug as a safety feature and will only
connect to an earthed socket. Do not attempt to defeat the earthing
or there is a risk of fire or shock.
If using an extension cable or power strip ensure that the total
current rating (amperes) of all connected equipment is less than the
maximum rating of the extension cable, power strip or wall outlet. If
the product is already supplied with a fitted power strip then no
additional power strip or extension cable should be used to connect
to the mains wall outlet. Otherwise, fire or shock may occur.
Ensure the power cable is routed so as not to be damaged or cause a
trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not intended
for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
If you do not connect the power cord or any other cables only as
directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to opening
covers; otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or print
head as you may receive burns. Allow it to cool before touching.
If the product casing gets extremely hot or smoke, unusual smells or
abnormal noises are emitted from the product, there is a risk of fire.
Unplug the mains connector and contact your dealer.
If the product has been knocked over or damaged, there is a risk of
electric shock, fire and/or injury. Unplug the mains connector and
contact your dealer.
If any liquid (for example water) is allowed to enter the product,
there is a risk of fire. Unplug the mains connector and contact your
dealer.
Do not place containers containing liquid on the product as electric
shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the
product, there is a risk of electric shock, fire and/or injury. Unplug
the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or operate
this product with any covers open or doors removed as electric shock,
fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the
product contains high temperature parts that may cause a fire.
Switch the product off before cleaning to prevent any risk of injury.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when the
product is in operation to prevent possible risk of injury.
Do not carry out any operations on the product that are not specified
in the User's Guide. This may result in electric shock, fire and/or
injury.
Do not touch the battery if one is fitted to the product. There is a risk
of explosion if the battery is replaced by an incorrect type. The
product battery should not require replacement during the life of the
product.
Do not throw toner cartridges or image drum cartridges into a fire as
you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other
internally fitted option, any covers removed or doors opened must
be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as measured
in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C and 20
to 80% RH. Operation of the product outside this range could result
in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these
items so as to avoid risk of entrapment or personal injury.
If the product is installed on a cabinet or high capacity feeder, ensure
wheel locks are applied once placed in final position for use, to
prevent risk of movement or injury.
English
Limited Warranty, US and Canada
U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this Microline 395
/ 395C (hereinafter "the Product") to be free from defect in
material and workmanship and will remedy any such defect
according to the terms of this Limited Warranty. This Limited
Warranty extends to the original purchaser only. This Limited
Warranty does not extend to consumable items, including but
not limited to ribbons, fuses, etc.
Oki Data will repair (or at its option, replace) at no charge,
any defective component(s) of the Product for a period of one
(1) year from date of purchase.
To make request or claim for service under this Limited
Warranty, contact your Oki Data Authorized service center or
Oki Data at 1-800-OKI-DATA (1-800-654-3282) or at
www.sharpusa.com. The original purchaser must return the
Product, shipping prepaid, in the original shipping container or
equivalent to Oki Data or an authorized Oki Data service
center and assume the risk of loss or damage in transit.
A written receipt for the product, showing the date of
purchase, dealer's name, and serial number of the Product,
must accompany any request or claim for work to be
performed under this Limited Warranty.
This Limited Warranty shall not apply if the product has been
damaged due to abuse, misuse, misapplication, accident, or
as a result of service or modification by any other than an
authorized Oki Data service center.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN
THOSE ON THE FACE HEREOF AND DESCRIBED
ABOVE. NO WARRANTIES WHETHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL
EXTEND BEYOND THE RESPECTIVE WARRANTY
PERIOD DESCRIBED ABOVE. Some states do not allow
limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE
FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM
THE USE OF THIS PRODUCT. Some states do not allow
the exclusion or limitation of incidental or consequential
damages, so the above exclusion may not apply to you.
Except for the warranty coverage referenced above,
NEITHER OKI DATA NOR ITS SUPPLIERS SHALL
HAVE ANY LIABILITY OR OBLIGATION TO
CUSTOMER OR ANY OTHER PERSON FOR ANY CLAIM,
LOSS, DAMAGE, OR EXPENSE CAUSED IN WHOLE OR
IN PART, DIRECTLY OR INDIRECTLY, BY THE
4 - English
Tabla de contenido
