Roadstar RCR-4730U/RD Manual De Instrucciones página 6

RANDOM PLAY WITH CD
1. Press the PLAY/PAUSE button (17) and after press the PROGRAM/ P-MODE button (11)
3 times to enter the Random mode. "RAND" appears on the display, then press
PLAY/ PAUSE button (17) to start playback in Random order.
2. Press SKIP Forward button (13) to go to next Random track.
3. Press the PROGRAM/ P-MODE button repeatedly until "RAND" disappears from
the display to return to the Normal Playback mode.
PROGRAMMED PLAYBACK FOR CD/USB
IN CD
1. Press the PLAY/PAUSE button (17) and after 5 seconds the STOP button (19).
2. Press the PROGRAM/ P-MODE button (11). The track number "P01" will appear and
"P" will appear on the display indicating the first selection.
3. Press SKIP Back () or SKIP Forward () button to select the desired track to be
programmed. The track number which will be programmed will appears on the display.
4. Press once the PROGRAM/ P-MODE button (11). to enter the track into memory. "P02"
will appear.
5. Repeat the steps 3 and 4 to program up to 20 tracks in CD or 99 tracks in MP3.
6. Press PLAY/PAUSE (II) button (10) once to start programmed playback.
7. To cancel programmed playback, press the STOP button (19) twice.
Note:
During program playback, if you wish to repeat the entire programmed playback,
press the PROGRAM/ P-MODE button (11) repeatedly until the
appears on the display.
BASS BOOST
Press the BASS BOOST Button (18) to " ON " position to enjoy a more powerful Bass sound.
ANTI-SHOCK FUNCTION
• If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a
moving vehicle), The ANTI-SHOCK function is active to provide uninterrupted playback
when power on.
7
English
indicator
TAPE RECORDING IS NOT AVAILABLE ON THIS MODEL
8
English
• Should the player receive shocks for more than 8 seconds continuously in CD playback
or 30 seconds in MP3 playback, the sound can mute for a very short while and will
resume once the player has stabilised from the shock.
Notes:
• The Anti-shock function will not correct the errors arising from the use of defective
scratched or dirty discs.
• IMPORTANT! During CD/MP3 playback, the ANTI-SHOCK function is always ON and
this function can not be disactivated.
CASSETTE OPERATION
INSERTION AND REMOVAL OF CASSETTES
1. Press the Stop/Eject Button (22) to open the Cassette Door.
2. Slip your cassette tape into the holder with the exposed side facing up (the side for
playing faces you).
3 Close the Cassette Doors securely before starting.
4 When finished playback, press the Stop/Eject Button to open the Cassette Door, and
retrieve your cassette tape.
PLAYBACK
1. Set the Function Selector (9) to the TAPE position.
2. Insert your cassette tape with the exposed side facing up.
3. Press the Play Key (25) to activate playback.
4. Set the Volume to the desired level.
5 Press the Stop/Eject Key (22) when finished.
ATTENTION! THE RECORDING BUTTON IS NOT OPERATIVE!!