RAMSET T4MAG Manual Del Propietario Y De Seguridad página 2

SAFETY INTRODUCTION
Just as no one can merely read a book about driving an automobile and then
hope to drive one safely, no one should attempt to use T4 gas powered tools
without adequate, competent personal instruction.
No automobile instruction book or instructor can forewarn a learner against all
possibilities and emergencies, nor can printed material detail all possible
conditions surrounding the use of Ramset tools and products.
Responsibility for the safe and proper use of this tool rests with the tool
user and the employer.
SAFETY INTRODUCTION
2
DANGER
!
Read, understand and follow the instructions in
the tool manual before attempting to use the tool.
!
erators an
protection.
!
Never close tool with hand over the fastener loading
end of the tool. A serious hand injury from penetration
by the piston or fastener could result.
!
The gas in fuel cells is under pressure and the gas
is flammable.
!
Do not open, puncture or burn fuel cells.
!
Store fuel cells in a well ventilated area, at temperatures
below 50° C (122° F) and out of the sunlight.
!
Keep fuel cells away from flames, sparks and heat.
!
Do not attempt to recharge, refill or recycle fuel cells.
!
Never operate the T4 tool if flammable or explosive
materials are nearby.
DANGER
tanders must wear eye and hearing
DANGER
DANGER