Description Of Terminals - Urmet 1083/9 Manual Del Usario

DESCRIPTION OF TERMINALS

]
LINE Bus line in
SE+ Positive for pedestrian crossing electric lock
SE- Negative for pedestrian crossing electric lock
[
V3 Control camera signal
A
V5 Reference for control camera signal
[
V3 Control camera signal  / video switch
B
V5 Reference for control camera signal  / video switch
]
ILA Output of device for deaf people
]
SE Driveway electric lock activation
T+ Command for video switch
T- Reference for video switch
CT Reference for PA and SP
PA Hall button
SP Open door detector
]
ILL Power supply for name tags lighting
- Local power supply negative
+ Local power supply positive
EXP Connector for 16 users expansion modules
IC Connector for module with voice messages and led Ref. 1158/47
DOOR UNITS CONFIGURATION
Default settings: default indoor station settings are:
PE type:
Secondary number:
Door opener:
Interruption:
Guaranteed conversation time rotary:
Door lock release rotary:
Door unit number:
ID:
door unit number
Set a number from 0 to 3 if the door unit is a main unit (v. AUX) or from 0 to 31 if the door unit is a secondary
unit as shown in the following figure.
• There must not be two main stations with the same ID. Two secondary stations may coexist with the
same ID but with different address (v. AUX).
• The ID of the secondary door unit must coincide with the column ID set in the column interface 1083/50,
if present.
1
DOOR
AUX
TIME
0
ON DIP
1 2 3 4 5
0
ON DIP
1 2 3 4 5
CONV
ID
TIME
main
0
free
Not assured
30 s (pos 3)
1 s (pos 0)
0
O N O N
= =
DS1083-034A