Troubleshooting - Tristar AC-5474 Manual De Usuario

Instruction manual

TROUBLESHOOTING

Troubles Possible Causes
The unit • Water full indicator lamp blinks and
does not water tank is full.
start when • Room temperature is higher than the
pressing setting temperature.(Electric heating
power mode)
button. • Room temperature is lower that the
setting temperature.(Cooling mode)
The unit • The doors or windows are not
doesn't cool closed.
enough. • There are heat sources inside the
room.
• Hot air exhaust hose is not
connected or blocked.
• Temperature setting is too high.
• Air inlet in blocked.
Auto Power- • Heating protection, when the
Off in temperature at the air outlet exceeds
heating 70 degrees, the unit will power off
mode. automatically.
Noisy. • The ground is not level or not flat
enough.
• The sound comes from the flowing of
the refrigerant inside the air
conditioner.
E0 Code. • Room temperature sensor failed.
E2 Code. • Water tank full
12
THE PRODUCT OR EQUIPMENT CONTAINS
FLUORINATED GREENHOUSE GAS.
Suggested Remedies
• Drain the water out of
Art.nr.
the water tank.
Coolant:
• Adjust the
temperature.
Quantity in kg:
Global Warming Potential:
Art.nr.
• Make sure all the
Coolant:
windows and doors
are closed.
Quantity in kg:
• Remove the heat
Global Warming Potential:
sources if possible.
• Connect or clean the
Art.nr.
hot air exhaust hose.
• Reset the temperature.
Coolant:
• Clean the air inlet.
Quantity in kg:
• Allow room
temperature to cool Global Warming Potential:
before re-starting the
Art.nr.
unit.
Coolant:
• Place unit on a flat,
level ground if
Quantity in kg:
possible.
Global Warming Potential:
• Replace room
temperature sensor.
• Please empty the
water tank.
AC-5474
R290
0,10
3
AC-5477
R290
0,14
3
AC-5529
R290
0,16
3
AC-5531
R290
0,16
3