While operation the power indicator (7) will show the remaining battery level as
follows:
4 blue LEDs = <100%
3 blue LEDs = <75%
2 blue LEDs = <50%
1 blue LED = <25%
05.1 POWER BANK FUNCTION
Open the charging socket cover (8) and connect the desired device with its respec-
tive USB charging cable to the USB output (10). Charging will begin immediately
when everything is connected correctly. The work light will charge as long as the
external device is connected.
CAUTION: After charging is completed, unplug the external device from USB
output (10) to prevent the work light from deep discharge.
06 | MOUNTING OPTIONS
The base (2) incorporates a magnet (3) – this way you can attach the work light
to metallic surfaces. The rear side of the work light incorporates two additional
magnets (6) which allow further possibilities to mount the work light. The swivel-
mounted base (2), allows to direct the light in desired position. Use the two fold-out
hooks (5) on the rear side for hanging the work light to non-metallic objects.
07 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the head light. We re-
commend a soft, slightly damp microfiber cloth to clean the outer parts of the de-
vice. Turn off the device and take off from any power source before cleaning. Store
the device in a dust-free, dry and cool place. This device is not a toy – keep it out of
reach of children. Keep away from pets.
08 | TECHNICAL SPECIFICATIONS
Illuminant
Brightness in Lumen
800 lm at 100%
Main LED
210 lm at 30%
Auxiliary LED
60 lm
Impact resistance up to drop height.
approx. 1 m according to IK06
No. of LEDs
2
Protection Class
IPX4
Power supply
1x Lithium-Ion battery type 26980 3,7 V 6000 mAh
Power supply included
Yes
Dimmer
Yes
Operating voltage
3 V
USB Output
5 V 1 A
Housing material
Plastic material
Dimensions approx. in [cm]
30,8 x 6,5 x 3,9
Colour
Red & grey
Weight approx. [g]
533
Charger
Input
AC 100 - 240 V 50/60 Hz
Output
5 V 2 A
Dimensions approx. in [cm]
10,5 x 6,0 x 3,5
Weight approx. [g]
40 (without cable)
09 | CONTENT
1x Work light W-31
1x USB adapter
1x USB charging cable
1x Safety hints
10 | DISPOSAL, CE MARKING
Runtime approx. in hours
3,5h at 100%
12h at 30%
24 h
08
10.1 DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed out bin. This symbol indi-
cates that empty batteries or accumulators which can no longer be charged
should not be disposed of with household waste. Waste batteries may contain
harmful substances that can cause damage to health and to the environment.
Please use the return and collection systems available in your country for the
disposal of the waste batteries.
10.2 WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is
the European community directive on waste electrical and electronic equip-
ment, which became European law in February 2003. The main purpose of
this directive is to prevent electronic waste. Recycling and other forms of
waste recovery should be encouraged to reduce waste. The symbol (trash
can) on the product and on the packing means that used electrical and elec-
tronic products should not be disposed of with general household waste. It
is your responsibility to dispose of all your electronic or electrical waste at
designated collection points. Disposing of this product correctly will help
to save valuable resources and it is a significant contribution to protect our
environment as well as human health. For more information about the cor-
rect disposal of electrical and electronic equipment, recycling and collection
points please contact your local authorities, waste management companies,
your retailer or the manufacturer of this device.
10.3 ROHS CONFORMITY
This product is compliant with the European RoHS directive for the restriction
of use of certain hazardous substances in electrical and electronic equipment
and its amendments.
10.4 CE MARKING
The CE marking complies with the European standards and indicates that the
product meets the requirements of the applicable EU directives.