Brother XL-3500 Manual De Instrucciones página 4

Tabla de contenido
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.
IMPORTANT
If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut
off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in
the plug.
NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is
hazardous if engaged in a live socket outlet. In the event of replacing the plug fuse, use a fuse
approved by ASTA to BS 1362, i.e. carrying the
Always replace the fuse cover. Never use plugs with the fuse cover omitted.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED
WITH THE LETTER 'E', BY THE EARTH SYMBOL
YELLOW.
The wires in this main lead are coloured in accordance with the following code:
Blue
Neutral
Brown
Live
As the colours of the wiring in the main lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter
'N' or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with the letter
'L' or coloured red or brown.
mark, rating as marked on plug.
OR COLOURED GREEN OR GREEN AND
3
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xl-3500tXl-3500iXl-3510Xl-3520Xl-2600Xl-2600i ... Mostrar todo

Tabla de contenido