Design And Function; Overview; Assembling - Caso GERMANY PJ 1000 Instrucciones De Funcionamiento Originales

• Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
• The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

13 Design and Function

In this chapter, you'll find important information on the design and function of the device.

13.2 Assembling

1. Place main machine on the table.
2. Place middle ring on the main machine.
3. Assemble the juicing net carefully on the rotor and clinch it with a soft clockwise
rotation (deassembling: anti clockwise).
4. Place transparent cover on the middle ring.
5. Clinch residue barrel under the ejection and around transparent cover.
6. Tight and clinch the handle.
7. Push juicer jug over the juicing noozle.
Please note
► This device is equipped with a safety lock. When the parts are not locked in properly,
the motor will not turn on.
Caso Entsafter PJ 1000

13.1 Overview

1. Pushing bar
2. Transparent cover
2a Feeding port
3. Juicing net
4. Middle ring
4a Juicing noozle
5. Handle
5a Rotor
6. Residue barrel
7. Main machine
8. Juicer jug
26