ROTOR 3D XC3 Guía De Instalación Rápida página 2

#1. Bottom Bracket and Rings Installation.
Read ROTOR SABB or BB1, and Q-RINGS user manuals:
#2. Drive-Side Assembly Installation.
3 5
#3. Non-Drive Side Spacer / O-rings Installation.
XC2 : 6,5mm
XC3 : 10mm
4
4 3
#4. Non-Drive Side Assembly preparation.
ALLEN 5mm:
1,5 TURNS
www.rotorbike.com
XC2 : 4mm
XC3 : 7,5mm
5
DO NOT REMOVE
THE BOLT
#5. Non-Drive Side Assembly Installation.
#6. Non-Drive Side Cap installation / preload.
ALLEN 8mm:
#7. Fixing the Non-Drive Side Assembly
ALLEN 5mm:
7-8 Nm
DISASSEMBLY.
1. Using a Allen 5mm key, unscrew the DTT bolt 2.5 turns (
WARNING: DO NOT REMOVE THE BOLT from the Non-Drive Side arm.
2. Using a Allen 8mm key unscrew the Non-Drive Side Cap (counter-clockwise)
and remove it.
3. Remove the Non-Drive Side arm and the O-ring from the axle.
4. Remove the Drive Side Assembly.
PRELOAD BOTTOM BRACKET BEARINGS.
DO NOT OVER THIGTHEN THE BEARINGS.
ENSURE THEY TURN SMOOTHLY WITH NO
LATERAL PLAY.
counter-clockwise ).