OK. OBO 3221 Manual De Instrucciones página 24

EN
PROGRAM MODES
Semi-automatic mode - setting the cooking time
11 This function is used to set a remaining cooking time. The maximum settable remaining cooking
time is 10 hours. The setting and activation can be done during cooking or before.
1. Press the function key
2. Set hours / minutes with
An A is shown in display, the function is activated and the set time is elapsing.
3. Set the desired operating mode and temperature.
Note: The oven switches off when the preset cooking time expired.
Semi-automatic mode - setting the time to finish cooking
12 This function is used to set a time to finish cooking. The setting and activation can be done during
cooking or before.
1. Press the function key
2. Set hours / minutes with
An A is shown in display, the function is activated and the time to finish cooking is set.
3. Set the desired operating mode and temperature.
Note: The oven switches off when the time to finish cooking is reached.
Automatic Mode - preset the cooking time and the time to finish cooking
13 This function is used to set a cooking time and time to finish cooking.
1. Press the function key
minutes with
An A is shown in display.
2. Press the function key
hours / minutes with
The current time and an A are shown in display.
The cooking time and the time to finish the cooking are set and the function is activated.
Note: The built-in oven is switched off when the time to finish the cooking is reached.
3. Set the desired operating mode and temperature.
Note: The time to finish the cooking can only be set for a coming period of 23 hours and 59 minutes.
INSERTING BAKING TRAY OR GRATE
14 Slide the baking tray or the grate straight in the oven's slots. Make sure not to tilt it.
IM_OBO3221_140930_V03_HR.indb 24
until the display shows the text dur. The text is blinking.
/ buttons and confirm each with the function key
until the display shows the text End. The text is blinking.
/ buttons and confirm each with the function key
until the display shows the text dur. The text is blinking. Set hours /
/ buttons and confirm each with the function key
again until the display shows the text End. The text is blinking. Set
/ buttons and confirm each with the function key .
24
.
.
.
30/9/14 5:16 PM