Bosch Professional GSB 18-2 RE Manual Original página 13

OBJ_BUCH-1748-003.book Page 13 Monday, November 17, 2014 11:17 AM
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Technical Data
Impact Drill
Article number
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact rate
– 1st gear
– 2nd gear
Rated torque
– 1st gear
– 2nd gear
Spindle collar dia.
Speed preselection
Right/left rotation
Key type drill chuck
Keyless drill chuck
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck*
2 Front sleeve*
3 Rear sleeve*
4 "Drilling/Impact Drilling" selector switch
5 Rotational direction switch 6 Lock-on button for On/Off switch
7 On/Off switch
8 Thumbwheel for speed preselection
9 Gear selector
10 Button for depth stop adjustment
11 Wing bolt for adjustment of auxiliary handle
12 Auxiliary handle (insulated gripping surface)
13 Depth stop
14 Handle (insulated gripping surface)
15 Chuck key*
16 Key type drill chuck*
17 Screwdriver bit*
18 Universal bit holder*
19 Hex key**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
GSB 18-2 RE
3 601 AA2 1..
W 800
W 420
-1
min 0 – 1100
-1
min 0 – 3000
-1
min 0 – 740
-1
min 0 – 1930
-1
min 0 – 17 600
-1
min 0 – 48 000
Nm 4.8
Nm 1.8
mm 43
English | 13
GSB 18-2 RE
3 601 AA2 2..
800
420
0 – 1100
0 – 3000
0 – 740
0 – 1930
0 – 17 600
0 – 48 000
4.8
1.8
43
 
 

–

–
2 609 140 960 | (17.11.14)