TEMPUR-PEDIC ERGO EXTEND Manual Del Propietário página 6

safety precautions and usage statements
OUTPUT: DC 29V 2.0A
WATTS: 58W
Product Ratings:
The lift motors are not designed to operate continuously for more
than two [2] minutes in an eighteen [18] minute time period or
approximately 10% duty cycle. Attempting to circumvent or exceed
this rating will shorten the life expectancy of the product and may
void the warranty.
The massage motors are not designed to operate continuously for
more that 30 minutes at a time. Please allow the massaging system
to rest for 30 minutes after automatic massage shut off before
restarting.
Weight Limits:
The recommended weight limits on the TEMPUR-PEDIC ERGO
EXTEND are:
TM
Twin Long / Queen / King / Split CA King / CA King: 850 pounds.
Maximum weight the bed can support per person is 350 pounds
with the weight evenly distributed across the head and foot
sections. This product is not designed to support or lift this amount
of weight in the head or foot sections alone. NOTE: Exceeding
the recommended weight restrictions could damage your
TEMPUR-PEDIC ERGO EXTEND
performance, you should enter and exit the TEMPUR-PEDIC ERGO
EXTEND while it is in the flat or fully lowered position.
TM
TEMPUR-PEDIC ERGO EXTEND
furniture beds and platform beds that are certified to hold a
minimum of 1000 pounds. If using this adjustable base without the
legs and placing directly on a bed frame or platform bed, cross-bed
supports (slats) are strongly recommended to ensure TEMPUR-
PEDIC ERGO EXTEND
TM
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
2
and void your warranty. For best
TM
fits easily inside bed frames,
TM
maintains stability during operation.
Acoustics:
I
n normal base operation the wheels, which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise. When
entering, exiting or shifting weight on the base, this contact noise
may be audible as the wheels make contact. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light
damp sponge or vacuum with a soft brush attachment to remove
particles. Keep at a minimum of 30cm (12 inches) away from direct
heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Wipe with a clean cloth dampened with warm water. Do not wet
excessively. A soft bristle brush may be used to remove ingrained
soil. Avoid scratching by gentle brushing. Wipe with a clean cloth
dampened with warm water to remove residues after brushing. Dry
in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional
advice.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any change
to the antenna or the device could result in the device exceeding
the RF exposure requirements and void user's authority to
operate the device.
CAN ICES-3 (B)/NMB-3(B)