Maintenance & Cleaning - Delabie TEMPOCHASSE 760220 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
REMEMBER
Our valves must be installed by professional installers in
accordance with current regulations and recommendations in your
country, and the specifications of the fluid engineer.
Sizing the pipes correctly will avoid problems of flow rate, pressure
loss and water hammer (see calculation table in our brochure and
online at www.delabie.com).
Protect the installation with filters, water hammer absorbers
and pressure reducers to reduce the frequency of maintenance
(recommended pressure from 1 to 5 bar maximum).
Install stopcocks close to the valve to facilitate maintenance.
The pipework, filters, non-return valves, stopcocks, bib taps, cartridge
and all sanitary fittings should be checked at least once a year, and more
frequently if necessary.
MAINTENANCE & CLEANING
Cleaning chrome, aluminium and stainless steel: do not use
abrasive, chlorine or any other acid-based cleaning products. Clean
with mild soapy water using a cloth or a sponge.
Frost protection: drain the pipes and operate the valve several times
to drain any remaining water.
In the event of prolonged exposure to frost, we recommend taking the
mechanisms apart and storing them indoors.
For the UK market only: Tel. 01491 821 821 - email: [email protected]
The installation guide is available on: www.delabie.co.uk
For all other markets: Tel. +33 (0)3 22 60 22 74 - email: [email protected]
The installation guide is available on: www.delabie.com
After Sales Care Support:
18
Tabla de contenido
loading

Tabla de contenido