Idiomas disponibles
Idiomas disponibles
Installation instructions for part GMOS-09
GM Data Interface
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, speed sense)
• Retains chimes
INTERFACE COMPONENTS
• GMOS-09 interface • GMOS-09 harness
• 16-pin harness with stripped leads
OLDSMOBILE
Aurora
®
Axxess Integrate
®
GMOS-09
2001-2005
INTERFACE FEATURES
• Retains OnStar / OE Bluetooth
• Adjustable OnStar level
• Designed for amplified models
• Retains balance and fade
• USB-CAB (sold separately) updatable
APPLICATIONS
PONTIAC
2001-2003
Bonneville
axxessinterfaces.com
2000-2005
•
metraonline.com
Table of Contents
Connections to be made .........................................2
Installing the GMOS-09 ..........................................3
Initializing the GMOS-09.........................................3
Adjusting the GMOS-09 ..........................................3
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
• Small flat-blade screwdriver
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
Tabla de contenido
Manuales relacionados para Axxess GMOS-09
Resumen de contenidos para Axxess GMOS-09
- Página 1 • Connectors (example: butt-connectors, bell caps, etc.) • Retains chimes • USB-CAB (sold separately) updatable • Small flat-blade screwdriver INTERFACE COMPONENTS • GMOS-09 interface • GMOS-09 harness • 16-pin harness with stripped leads CAUTION! APPLICATIONS All accessories, switches, climate controls panels, and...
-
Página 2: Connections To Be Made
Orange/White. • Connect the Gray wire to the right front positive speaker output. From the GMOS-09 harness to the aftermarket radio: • Connect the Gray/Black wire to the right front negative speaker output. • Connect the Black wire to the ground wire. -
Página 3: Installing The Gmos-09
With the key in the off position: • With the vehicle and radio turned on, turn the volume up 3/4 of the way. • Connect the 16-pin harness with stripped leads, and the GMOS-09 harness, into the interface. • With a small flat-blade screwdriver, adjust the potentiometer clockwise to raise the audio level;... - Página 4 ® Installation instructions for part GMOS-09 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 5 • Pequeño destornillador de cabeza plana • Retiene los tonos (se vende por separado) COMPONENTES DE LA INTERFASE • Interfase GMOS-09 • Arnés GMOS-09 • Arnés de 16 pins con conectores pelados ¡PRECAUCIÓN! Todos los accesorios, interruptores, paneles de con-...
- Página 6 • Conecte el cable gris con la salida positiva de la bocina derecha delantera. Del arnés GMOS-09 al radio de mercado secundario: • Conecte el cable gris/negro con la salida negativa de la bocina derecha delantera. • Conecte el cable negro al cable de tierra.
- Página 7 • Con el vehículo y el radio encendidos, aumente el volumen hasta 3/4 de su totalidad . • Conecte el arnés de 16 pins con conectores pelados, y el arnés GMOS-09, a la • Con un pequeño destornillador de cabeza plana, ajuste el potenciómetro interfase.
- Página 8 ® Instrucciones de instalación para la pieza GMOS-09 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...