Product Maintenance - Home Decorators Collection 1002099636 Manual De Instrucciones

INSTALLATION INSTRUCTIONS (CONTINUED):
3. Mount the body of the fixture on the wall by aligning the protruding Mounting Screws (#10) all
the way through the holes on the Back Plate (#4). Be careful not to pinch any of the wires
between the fixture and the Outlet Box (#9). Tighten the fixture to the wall by screwing the two
cap nut (#3) onto the two protruding Mounting Screws (#10).
4. Once the fixture is mounted on the wall, caulk the space between the wall and the upper 3/4 area
of the Back Plate (#4) to prevent water seeping into the Outlet Box (#9). Leave the bottom 1/4
area un-caulked for drainage of any water which might leak into the enclosure.
5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the light
switch on to activate the fixture.
INSTALLATION:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water,
never a solvent) to wipe the glass and surface of the fixture.
2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth
(use clean water, never a solvent) to wipe the inside glass and interior surface of the fixture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to
dust or wipe carefully.
8.Wire Connector
3.Cap Nut
13.Outlet Box Screw
9.Outlet Box
10.Mounting Screw
11.Cross Bar
12.Ground Screw
Page 7