Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
Turning on and off the TV
TURN ON LED TV
1. Connect the AC input cable then turn on the power switch of the TV . At this time the
TV will enter standby mode.
2. Press
button on TV or
button on remote control can turn on LED TV from
standby mode .
TURN OFF LED TV
Press
button or
button on the remote control to enter standby mode.
No signal
- There is No Signal menu on screen when there is no input signal. In TV/DTV/VGA
mode, if there is no signal in five minutes, the LED TV will turn off automatically.
Choosing a TV channel
1. Using the CH+/CH- on the panel of TV or on the remote control.
• Press CH+ to increase channel number.
• Press CH - to decrease channel number.
2. Using 0- 9 digital buttons
You can select the channel number by pressing 0 to 9. (In TV,DTV mode)
3. Example:
• To select - channel (e.g. Channel 5): Press 5 .
• To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume adjustment
1. Press VOL+/- to adjust the volume.
2. If you want to switch the sound OFF, press the MUTE .
3. You can release mute by pressing MUTE or VOL+.
10
Capítulos
Tabla de contenido
Solución de problemas
