Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Holding the trim kit frame in place, use a 7/64" drill bit to drill
four pilot holes into the front facing
the mounting hole guides in the upper and lower corners of
the trim kit frame.
NOTES:
The holes will be drilled downward from the top, and
upward from the bottom at an angle of about 45°.
To avoid damage to the trim kit frame, do not overtighten
screws.
A
B
A. Trim kit frame
B. Mounting hole guide
of the cutout/cabinet through
C
D
C. Long wood screw (4 - painted)
D. Cutout ceiling
3. Secure trim kit frame to cutout/cabinet by installing four long
wood screws (painted) into the pilot holes drilled in Step 2
above.
Installation is now complete. Replace any loose items that have
been removed from microwave oven cavity.
Save these Installation Instructions for future reference.
EN-6
Tabla de contenido
