Electrical Requirements; Prepare Microwave Oven - Kenmore Elite 405.24303410 Instrucciones De Instalación

Marco del horno incrustado de microndas
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Electrical Requirements

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Install according to all local governing codes and ordinances.
Required:
A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
Recommended:
A time-delay fuse or time-delay circuit breaker.
A separate circuit serving only this microwave oven.
GROUNDING INSTRUCTIONS
For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING:
Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
SAVE THESE INSTRUCTIONS

Prepare Microwave Oven

Attach Rails
1.
Unplug microwave oven before proceeding with installation.
2.
Remove any loose items inside microwave oven.
3.
C
arefully turn microwave oven onto its top, with the door facing
forward (toward installer).
4.
Align the two rails on the microwave oven bottom, as shown,
making sure the flanges are forward and pointing up.
A
A. Rails (2)
B. Microwave oven bottom
C
.
Short screws
5.
Secure the rails to the microwave oven bottom using four
short screws.
Attach Rear Duct
1.
Carefully
return microwave oven to its upright position.
2. Align the rear duct with the back of microwave oven, as
shown.
EN-3
B
C
D
E
D. Flanges
E. Door
( ) 4
Tabla de contenido
loading

Este manual también es adecuado para:

Elite 405.24309410

Tabla de contenido