Scope Of Delivery; Intended Use; Installation And Connection; Remote Control - Pontec PondoSolar Island 250 Control Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20

Scope of delivery

 A
Quantity
1
1
2
4
3
1
4
1
5
1

Intended use

PondoSolar Island 250 Control, referred to as "unit", may only be used as specified in the following:
• For creating a water fountain in a pond.
• For operation with clean water.
• Operate in accordance with instructions.
The following restrictions apply to the unit:
• Never run the unit without water.
• Never use the unit to convey fluids other than water.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.

Installation and connection

How to proceed:
 B, C
1. Pull the blind plug out of the connection.
– The blind plug protects the electronics from the ingress of water.
– Insert the blind plug as soon as the connection plug is removed.
2. Insert the connection cable into the socket.
– Push the plug into the socket as far as possible to ensure that the connection is watertight.
3. Fit the pump to the float unit.
4. Fit the nozzle unit to the float unit.
5. Place the float unit onto the surface of the water.
Commissioning/start-up
How to proceed:
The rechargeable battery of the unit is not charged. Expose the unit to sunlight for one day before using it for the first
time. Then use the remote control to operate the device.

Remote control

 E
The remote control has a range of max. 10 m.
Description
A
Determines the pump operating time (max. 4 h).
− To overwrite the current setting, switch off the pump
with key D and then set the new pump operating time
with key A. The pump will then start up automatically.
B
Switches the LEDs on and off (they are only lit when it is
dark)
C
For setting the flow rate of the pump (5 stages)
D
For switching the pump on and off
Description
Float unit with integrated solar module
Nozzle attachment
Nozzle holder
Pump with connection cable
Remote control
Function
Press the key slowly 1 ×. The LED flashes according to the
newly set pump operating time.
− Example: Desired pump operating time 3 h.
Press the key A 3 × slowly. The LED flashes 3 × several
times in a row.
Press the key briefly.
Press the key slowly 1 × for each stage.
Press the key briefly.
- EN -
9
Tabla de contenido
loading

Tabla de contenido