Idiomas disponibles
Idiomas disponibles
HANDBOOK
ENGLISH
TRANSMITTER
INSTALLATION AND BATTERY CHARGE
Transmitter:
Switch in position OFF
1.- Open the battery covers.
2.- Fit the batteries (respect polarity).
3.- Close battery covers.
Helicopter:
Switch in position OFF.
When the process finishes the LED will turn on. (Charging time approx. 90 min).
HELICOPTER FLIGHT
Before flight:
1. With the helicopter switched off, first switch on the transmitter.
2. Switch on the helicopter.
3. Place the helicopter in the floor.
4. Ready to fly.
Trim adjustments:
1. Push again the left stick SLOWLY to start the flight (approx. between 0,5m and 1m).
2. If the tail turns left or right, please trim it using the trim button on the transmitter. Turn it clockwise o vice versa until the helicopter stops turning.
Dual rate. User-level:
The user has Beginner (70%) or Advanced (100%)
control depending on your piloting skills. Use the switch
to change level. Advanced is ideal for experienced riders.
Beginner choice is recommended if it is the first flight of
the user, since it is slow and progressive movements.
5
NINCOAIR is brand of NINCO DESARROLLOS S.L.
Crta. de L'Hospitalet 32
08940 Cornellà - Barcelona - Spain
CIF B-60307725 - www.nincoair.com
